TARPEN bitumen and glue remover from KiurLab effectively removes bitumen dirt and glue

Do you want to quickly and effectively remove resin, asphalt or tar from your car’s paintwork or wheels? Or is this type of dirt on your windows? Don’t worry, your problem will be solved in an instant. All you need is our bitumen and glue remover. Previously, removing resin and tar from the body could be a time-consuming and laborious process, now it is a thing of the past. See for yourself!

What is bitumen and glue remover?

Bitumen and glue remover is a chemical agent designed to remove asphalt glue bitumen and other difficult-to-remove dirt from metal, glass, rubber and plastic surfaces. No need to scrub or use a heat gun to soften the dirt, just spray, wait and clean the dissolved resin. KiurLab Tarpen also copes well with glue residues, for example after removing stickers or film from the car surface or old registration stickers.

TARPEN tar and glue remover advantages:

• Higher level of safety Tarpen is developed using natural orange terpene which effectively removes bitumen dirt. It is safer than traditional solvent-based products and has a pleasant citrus aroma.
• Fast action the product begins to act a few seconds after application.
• Efficiency and reliability the product copes with dirt even on large surfaces.
• Long evaporation time due to slow evaporation, Tarpen allows the product to act on the paint surface for several minutes.

How to use KiurLab TARPEN tar and glue remover?

Tar and glue remover is a powerful specialized chemical agent. It should be used in accordance with the product instructions. When working with this agent, ensure good room ventilation, wear protective gloves, a mask and safety glasses.

Recommendations before use:

• Shake the bottle before use to mix the composition.
• Test the effect of the agent on a less visible part of the surface to make sure it is not damaged.
• Avoid direct sunlight when working as they can accelerate the evaporation of Tarpen from the surface.

How to use Tarpen Tar and Glue Remover:

• Spray the product onto a dry surface from a distance of approximately 10 cm.
• After a few minutes, rinse the surface thoroughly with pressurized water or remove dirt with a microfiber cloth.
• Repeat the procedure if necessary.
• After finishing work, rinse the sprayer with clean water to avoid damage to it. Be careful not to let water from the sprayer get back into the bottle.
• After using Tar and Glue Remover, it is recommended to wash the car thoroughly with a car shampoo intended for this purpose.

---

Safety information:

Signal word: DANGER! Contains: Hydrocarbons C10C13 nalkanes isoalkanes cyclic compounds lt 2 aromatic compounds 2-butoxyethanol Orange sweet extract.

Hazard statements:

H226 Flammable liquid and vapor. H302H332 Harmful if swallowed or if inhaled. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H412 Harmful to aquatic life with long lasting effects.

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P264 Wash hands and exposed body thoroughly after handling. P280 Wear protective gloves. P301P310 IF SWALLOWED: Immediately call a doctor. P331 DO NOT induce vomiting.
P370P378 In case of fire: use powder extinguisher / sand / carbon dioxide to extinguish.