Innovacar DLLubeon Correction clay lubricant which reduces friction and protects the bodywork from damage while helping to remove contamination from surfaces and glass.

Main features:

• Lubricates and reduces residue: its formula allows for lubrication and creates less marks on the bodywork.
• Reduces friction and facilitates decontamination: helps the clay work on the surface preventing damage to the bodywork and windows.
• Multipurpose: it is also suitable for use with rags or discs both during vehicle preparation and any car detailing process where lubrication is requoned.
• Does not damage correction clay: does not affect the clay but maintains its durability and life.

Average consumption: 20 ml per car.

Totalry technical data:

• pH: 8.00

• Lubricate the polishing wheel with water instead of water as it evaporates less and does not interfere with polishing.
• Lubricate the bodywork surface and windows to use the correction clay.
• Save the clay over time without changing its composition.

How to mechanically clean a vehicle with correction clay and DL Lube:

1. Before proceeding, thoroughly wash the vehicle and assess the remaining contamination.
2. Mechanical decontamination with correction clay is suitable if body polishing is performed, otherwise it is better to perform chemical decontamination.
3. It is important to assess the contamination of the vehicle. To do this, you can perform a bag test which involves placing your hand in a plastic bag and gently wiping the bodywork. If the surface is rough to the touch, it means that decontamination is necessary.
4. Choose the most suitable correction clay, paying attention to the degree of scratches based on the existing paint and contamination.
5. Prepare the clay by mixing it and lighten it by adding a few sprays of the product.
6. Apply the product to the surface and move the panel crosswise, moving the clay horizontally from right to left over the entone area and then start again vertically from top to bottom, treating the entone area.
7. Dry the area with a clean microfiber cloth.
8. Mix the clay bar and lighten it by spraying the product and proceed according to the instructions above until the entone vehicle is finished.

Usage: Ready to use, do not dilute.

As a lubricant for polishing pastes and wheels:DL Lube can be used to extend the life of cutting polishing pastes during the polishing process as well as to reduce the amount of dust produced by simply spraying the product onto the wheel when it starts to become saturated. The recommended dilution is 1:8 to 1:10 i.e. use 90 ml to 110 ml of the product and fill the rest with water 910 ml to 890 ml to obtain 1L of ready to use solution.

Safety information:

According to Regulation EC No. 1272/2008, the mixture is not classified as hazardous.

Product Ingredients: lt5 Polycarboxylates Fragrances BENZISOTHIAZOLINONE PHENOXYETHANOL.