FX PROTECT G-FINITY CNT GRAPHENE COATING
A superhydrophobic carbon-ceramic coating enhanced with graphene and CNT carbon nanotubes for long-lasting body protection.
COATING FEATURES
- Superhydrophobic effect
- Graphene and CNT carbon nanotubes
- Durability up to 5 years or 60,000 km
- Fast and straightforward application
- Deepens colour and improves paint clarity
- UV, dirt and weather protection
- Fills minor paint imperfections and improves slickness
SUITABLE SURFACES
- Painted bodywork, wheels and plastics
- Unpainted exterior plastics and trim
- Vinyl and rubber
- Headlights
- Gloss and matte PPF
Before first use, test the product on an inconspicuous area. Incorrect application may cause irreversible surface damage.
TECHNICAL DATA
| Available sizes | 15 ml / 30 ml |
| Durability | up to 5 years / 60,000 km |
| Graphene and CNT | yes |
| Water contact angle | up to 165° |
| Hardness | 10H |
| Chemical resistance | pH 2–12 |
| Consumption for a medium car | 15–20 ml, 1 layer |
| Coating thickness | up to 1.25 μm per layer |
| Layers | up to 2; apply the next layer after 4 hours |
| Initial curing | 12 hours or IR curing |
| Full curing | 7 days |
| Application temperature | 10–25 °C |
| Air humidity | 30–70% |
| RELOG as a top coat | after 8–10 hours, or after 2 hours with IR curing |
| Fresh paint | after 6–8 weeks |
| After opening | use within 14 days unless stated otherwise on the packaging |
| Storage temperature | 10–20 °C |
APPLICATION
Chemically decontaminate the surface before application. Paint correction is recommended for the best finish and protection.
- Degrease the surface, for example with FX PROTECT SURFACE AGENT.
- Shake the bottle well.
- Fit the included suede microfibre to the applicator and add a few drops.
- Apply in overlapping cross-hatch passes to sections of about 50 × 50 cm.
- After 1–3 minutes, remove residue with a clean edgeless microfibre; exact timing depends on conditions.
- Lightly buff to a clear finish with a second microfibre.
Do not leave excess product for too long. Once crystallised, the cured coating can only be removed by heavy polishing or P1500–P2000 sanding.
SAFETY INFORMATION

Signal word: DANGER! Contains n-butyl acetate; hydrocarbons C10–C13, n-alkanes, isoalkanes and cyclic compounds with less than 2% aromatics; cyclosilazanes; 3-aminopropyltriethoxysilane; dibutyltin dilaurate; and methanol.
Hazards: H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H314 Causes severe skin burns and eye damage. H336 May cause drowsiness or dizziness. H360FD May damage fertility and the unborn child. H412 Harmful to aquatic life with long-lasting effects.
Precautions: P101 If medical advice is needed, have the product container or label at hand. P102 Keep out of reach of children. P280 Wear protective gloves, clothing, eye and face protection. P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353 IF ON SKIN OR HAIR: immediately remove contaminated clothing and rinse skin with water or shower. P305+P351+P338 IF IN EYES: rinse cautiously with water for several minutes; remove contact lenses if easy to do; continue rinsing. P310 Immediately call a doctor. P405 Store locked up. P501 Dispose of contents and container in accordance with local requirements or return them to the supplier.




Reviews
There are no reviews yet.