FlyBy30 Windshield Coating FlyBy30 is the answer to protecting your vehicle’s windshield and exterior glass surfaces. FlyBy30 uses new, cutting-edge materials to create a durable coating on glass windshields and windows. FlyBy30 is resistant to abrasion and wear caused by road damage, window wipers, dust, car washes, harsh cleaning agents and the environment.

With a high water droplet contact angle and low slip angle, it improves repellency and protection against rain, ice, snow and insects. 20ml kit includes: (1) 20ml FlyBy30. (1) Applicator pad. (2) 4-inch microfiber suede applicators. 20ml kit includes: (1) 20ml FlyBy30 bottle. (1) 50ml Ceriglass bottle. (1) 50ml eraser bottle. (1) Applicator pad. (1) Ceriglass handheld applicator. (2) 4-inch microfiber suede applicators. (1) 8-inch microfiber suede polishing cloth.

Instructions: Do not use on wet windshield as it may damage the surface. Polish the glass using Ceriglass or paint paste, by hand or machine. If there are scratches, use a machine.

Wipe off any residue. Clean the surface thoroughly with an eraser. Shake Flyby30, then moisten the included applicator enough to prevent it from sticking during application.

Apply in a crisscross pattern to one side of the windshield or one window. Apply more product as needed to avoid dragging or sticking the applicator. Allow the product to work for approximately 1-3 minutes (depending on temperature and humidity) and wipe off with a CARPRO 2Face towel or a quality microfiber towel.

Clean your wiper blades thoroughly and apply Reload to prevent them from rattling. Tips: We recommend: apply 2-3 coats to the windshield and 1 coat to all other windows. Successive coats can be applied immediately.

Can be maintained with Dr. Beasley AdvanceCoat: Glass or CARPRO Reload. *The shelf life of this coating is approximately 12-14 months unopened and 6 months or less after opening.*

Features: Easy to use. Value: Protects all exterior glass surfaces, using approximately 10 ml of coating. Perfect transparency: No smoke, smears or stains.

Provides safe and good visibility when driving in bad weather conditions. High water droplet contact angle (112 degrees) and low glide angle (15 degrees) improve repellency. Water repellency on windshields will last for approximately 4-5 months (1 season).

The raindrops will then continue to repel, but at a higher speed. FlyBy30 repels water droplets starting at 30 to 40 miles per hour, ensuring clear vision for safe driving. * Speed ​​varies depending on the angle of the windshield, average test conducted at 45 degrees. FlyBy30 can be used on all car windows, ensuring safe driving in the rain with clear all-round visibility.