SP1 Prewash from Innovacar is the most suitable car prewash for removing large amounts of dirtin contactless mode, i.e. without touching the car body with your hands. It is an excellent solution that despite its pH 1150 guarantees safe use on delicate car parts such as chrome-free plastic, etc. parts.

The features of this car pre-wash shampoo are:

• It is an active foam: it creates a pronounced foam that is specially designed for easy application and distribution over the entire surface of the car. Thanks to its formula, it lifts dirt particles, making them easier to remove.
• It is a deep cleaning organic decontaminator: It is the first pre-wash shampoo for car washes with added enzymes that are subject to patent protection that deeply clean organic dirt, in essence, enzymes can act several times on the same organic dirt substrate particles and molecules, such as a layer of dirt. .
• Quality raw materials: The shampoo is also made with plant-based surfactants making it gentle on plastic and does not contain added sodium hydroxide and does not contain phosphorus EDTA NTA.
• It is concentrated: The product is able to remove traffic film oil and grease without any mechanical action. Even with a reduced amount, it has a significant washing power and a truly deep cleaning.
• It makes rinsing easier: thanks to the plant-based foam and surfactants, it is easy to rinse.
• Clean scent: the product emits a pleasant clean aroma.
• It does not affect the nanotechnology used: it is ideal for applied ceramic coatings so as not to damage previously applied layers or jeopardize subsequent coating processes.

Average consumption:50 ml per car.

Totalry technical data:

• Cleaning capacity:5/5
• Foam effect:5/5
• Self-cleaning ability:5/5
• With added Enzymes:Yes
• Coating safety:Yes
• Surface safety:Yes
• pH:11.50

Patent application no. 14730984.3
Considering the enzyme-free version.

• Pre-washing in contactless mode without touching the car body with your hands.
• Using one product with appropriate dilution also for cleaning road dirt and insects.
• Cleaning cars that have already been treated with coatings or polishing procedures to maintain the effect and not damage the previously performed work.
• Cleaning cars that will then undergo additional processing of car parts such as polishing or coating.
• Proper preparation of the car for the washing stage by reducing dirt residues that can cause surface damage during the washing stage with a glove.

How to wash your car with SP1 Prewash in the pre-wash stage:

1. If there is mud, perform an initial rinse with high pressure to remove all large dirt.
2. If washing is done in winter, use the product in a more concentrated form, while in summer it is best to dilute it more.
3. First apply the product to the dirtiest areas, such as the underside of the car, wheels and arches, and leave it for about 1 minute. For even more effective results, use the product 100 Degreasing.
4. Continue spraying the diluted product on the entire car, starting from the bottom and applying it horizontally and then gradually moving upwards. This will prevent dripping.
5. Wait 1 to 3 minutes and be careful not to let the product dry.
6. Perform a non-contact high-pressure wash horizontally with plenty of water starting from the top of the car and gradually moving downwards.

If applied with a foam gun: the recommended dilution is 1:3 to 1:9 use 250 ml to 100 ml of product and add the remaining 750 ml to 900 ml of water to obtain 1 L of ready-to-use solution. During dispensing, the actual final dilution can reach approximately 1:60 to 1:150.

For frequent cleaning, the dilution can reach 1:15 i.e. use 60 ml of product and add the remaining water to 940 ml to obtain 1 L of ready-to-use solution. At the time of delivery, the actual final dilution may reach approximately 1:240.

If applied with a pre-filled bottle: the recommended dilution is 1:50 use 20 ml of product and add the remaining water to 980 ml to obtain 1 L of ready-to-use solution.

For frequent cleaning, the dilution can reach 1:100 i. use 10 ml of product and add the remaining water to 990 ml to obtain 1 L of ready-to-use solution.

For intensive dirt, the recommended dilution is 1:25 i. use 40 ml of product and add the remaining 960 ml of water to obtain 1 L of ready-to-use solution.

For insects and undercarriage: the recommended dilution is 1:25 i.e. use 40 ml of product and add the remaining 960 ml of water to obtain 1 L of ready-to-use solution

For rims and tires: the recommended dilution is 1:5 to 1:15 use 200 ml to 70 ml of product and add the remaining 800 ml to 930 ml of water to obtain 1 L of ready-to-use solution.

Caution: do not let the product dry out and do not use it in the sun or on hot surfaces. The product can be applied to a dry body, but in summer or in particularly hot areas it is advisable to rinse the car to lower the temperature and avoid it drying out during application.

Safety information:

Signal word: Danger! Contains: Alkyl polyglycoside C8C10 ETHANOLAMINE potassium hydroxide acetic acid 2-butoxyethoxy.

Hazard statements:

H314 Causes severe skin burns and eye damage.

Precautionary statements:

P101 If medical advice is needed, see the container or label. P102 Keep out of reach of children. P103 Read and follow all instructions carefully. P280 Wear protective gloves/protective clothing and eye/face protection. P301P330P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. P303P361P353 IF ON SKIN or hair: Take off immediately all contaminated clothing. Rinse skin with water or shower. P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER. P405 Store locked up. P501 Dispose of contents/container in accordance with local regulations.

Detergent content: 515 nonionic surfactants lt5 anionic surfactants polycarboxylates enzymes perfumes.