HENDLEX SPRAYABLE CERAMIC DC60

Sprayable nano ceramic coating for cars, motorcycles, airplanes, ships.

Hendlex DC60 is a powerful, easy-to-use sprayable ceramic coating that provides protection for car paint, rims, and plastic or metal moldings. The coated surfaces have unique hydrophobic properties, strong chemical resistance, and an excellent, clear shine.
PACKED WITH INERT GAS. Guaranteed 100% efficiency.

Features:

• Easy and quick application
• Significantly highlights and brightens the color
• Smooth mirror appearance with excellent gloss
• Provides excellent hydrophobic properties, repels water and dirt
• Provides a strong self-cleaning effect, requiring less effort to keep the surface clean
• Protects the surface from negative environmental influences and protects against minor scratches
• Strong chemical resistance.

PRODUCT SPECIFICATION

..

Surfaces to be treated painted and varnished surfaces plastics and metals

Area to be treated 5070 ml for one medium-sized car

Permanence Up to 12 years depending on weather conditions and care

Shelf life 1 year unopened

Chemical properties

..

Temperature resistance 30 C to 150 C

Chemical resistance 2ltpHlt13

Water contact angle 103

Conditions and packaging

..

Application temperature 10 C to 25 C recommended 20 C

Curing period 1224 hours initially 7 days to full cure

Storage temperature 5 C to 25 C

Packaging 60 ml aluminum bottle

..

SURFACE PREPARATION

Prepare the surface appropriately before applying Hendlex DC60. Follow these guidelines to ensure the best product performance:

• The surface must be thoroughly cleaned to remove any oil, dirt or other chemical residue.
• If the car has been waxed, the wax must be removed before applying the coating. We recommend using Hendlex Wax Remover.
• For best results, it is strongly recommended to perform a paint correction by buffing to remove all scratches and holograms. Make sure the surface is completely dry. We recommend thoroughly cleaning and preparing the surface with Hendlex Paint Prepare before applying the coating.

Usage

1. Spray the coating onto a microfiber towel facing away from the car.
2. Apply the coating evenly to the surface until the entire surface is covered in a wet, uniform layer. We recommend working in small areas.
3. Allow the coating to dry for approximately one minute or until the even layer begins to separate into individual flakes.
4. Lightly buff the surface with a clean microfiber towel until all excess coating is wiped off.
5. Buff the coated area with the other side of the clean microfiber towel for a perfect finish.
6. Recommended curing period for the coating:
   If the temperature is above 20C 12 hours initially
   If the temperature is 20C 24 hours initially.
   Do not wash the car for at least the next 7 days.

Note:After applying the coating to the car, turn the bottle upside down and clean the sprayer by blowing out the remaining coating. Store with the original bottle cap.

COVERAGE

5070 ml for one medium-sized car.

CAUTION!

Do not apply the coating to matte surfaces or in direct sunlight.
The correct application temperature is between 10 C and 25 C.
Do not apply the coating if the temperature is above 30 C.
Before finishing the coating application, polish everything using a microfiber towel.
Ensure that the entire surface is covered and that there are no uncoated areas and that no area has been polished to a clean finish.

---

Safety information:

Signal word: DANGER! Contains: Hydrocarbons C9C10 nalkanes isoalkanes cyclic hydrocarbons lt2 aromatics cyclosilazanes obtained from the reaction of methyl and dimethylhydrogen polymers with methyl and dimethylhydrogensilazanes 3-aminopropyltriethoxysilane

Hazard statements:

H226 Flammable liquid and vapor. H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H314 Causes severe skin burns and eye damage. H336 May cause drowsiness and dizziness. H412 Harmful to aquatic life with long lasting effects. EUH066 Repeated exposure may cause skin dryness or cracking. Causes skin irritation. H304 May be fatal if swallowed and enters airways.

Precautionary statements:

P260 Do not breathe dust/fume/gas/mist/fumes/spray. P280 Wear protective gloves/protective clothing/eye protection.P301P330P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.P303P361P353 IF ON SKIN or hair: Take off immediately all contaminated clothing. Rinse skin with water/shower.P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.