IronX Highly effective, acid-free and pH balanced CARPRO IronX prevents rust spots and premature clear coat damage by quickly removing iron contaminants throughout the vehicle! Using IronX saves time and helps avoid the laborious clay treatment process used in traditional car care regimens. This CARPRO IronX formula is safe and effective for use on all car surfaces and will not damage clear coats.

This preventative measure stops premature corrosion. Chemical compounds in the air and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that work their way deep into the paint’s sub-layers. It’s a gradual process that goes unnoticed until it’s too late.

IronX contains unique chemical ingredients that effectively dissolve the sintered iron, forming a water-soluble iron complex. No other method cleans paint and wheels as deeply as IronX. The IronX Paint and Wheel Decontamination System was designed to address the root of the problem (BELOW the top surface) rather than just shaving off the surface of the particles like traditional clay treatments do.

During vehicle use, brake dust and road grime adhere to the paint surface and rims due to the high temperatures to which they are exposed. Brake dust has a high iron content and once it adheres to the rims, it becomes extremely difficult to dissolve or remove without the use of harsh chemicals. IronX opens the pores of the paint to release the iron particles and neutralize the corrosive compounds that have formed in the paint base.

By removing iron particles, existing damage is immediately stopped and further damage is prevented. IronX sprays as a clear liquid. As the cleaning fluid begins to work on dirt and deposits, the formula begins to turn purple or red.

This painting effect is achieved by IronX binding to the sintered iron on the car’s paint or rim and changing its state to a water-soluble complex so that it can be easily removed by wiping or pressure washing. Stubborn, burnt-on dirt can be slightly loosened. IronX is widely used by body shops, high-end car repair shops and even dealers to prepare new and used cars.

Proven to provide a clean, smooth vehicle free of iron impurities. No other iron decontamination product is as safe, fast and effective! Get your Sky’s the Limit Car Care today!

Features: New low-odor formula! Removes iron particles and prevents the spread of iron-related damage, and helps protect your vehicle from paint system damage. Safe to use, acid-free and pH neutral (pH 6-7).

Safe to use on clear paint. Safe to use on aluminum, chrome, alloy or clear coated wheels. Directions: Shake the bottle.

Wash the vehicle, rinse the vehicle and wipe off most of the water with a quick towel. Spray IronX onto the contaminated area. Rinse after 2-5 minutes or wash off if it has dried (depending on the environment and temperature).

Make sure all IronX is completely removed, then dry the vehicle. After use, remove the nozzle and replace the cap (to prevent leakage). Precautions: Test in an inconspicuous area before use.

Do not use on anodized surfaces. Do not use on unknown aftermarket finishes or cheap acrylic paints. Avoid use on fabric convertible tops or rubber containing recycled tires.

Keep out of reach of children and pets. Do not swallow. Use outdoors or in a well-ventilated area.

Avoid prolonged skin contact. Avoid inhalation. Use personal protective equipment (PPE) as necessary.